Brokk 160

Brokk 160

Specifications

  • Weight: 1600 kg (3527 lbs)
  • Width min: 780 mm (30.7 in)
  • Height min: 1254 mm (49.4 in)
  • Motor output: 18.5 kW
  • Recommended max weight attachment: 270 kg (595 lbs)
  • Sound power level Lwa: 85.8 db(A)
  • Transport speed, max: 2.1 km/h (0.6 m/s, 1.3 mph)
  • System pressure incr. to attachment max: 17.5 MPa (2538 psi)
  • Hydraulic system capacity: 80 litres (21.1 US gal)
  • Pump flow max. at 50Hz: 62 l/min (16.4 US gal/min) 
Description

Details

Brokk Controlled Demolition DON'T LET THE SIZE FOOL YOU.

The Brokk 160 is a giant leap forward when it comes to small size and impressive strength. This lightweight, remote-controlled demolition machine and its power-packed electric motor, hits frighteningly hard (over 406 joules at the tip). As with our complete line of remote demolition machines, safety is the first design priority. The Brokk 160's state-of-the-art digital remote control takes the Brokk 160 Goes Anywhere The new BROKK 160 is the latest and most advanced machine to come from BROKK and will fill the gap between the Brokk 90 and the Brokk 180. Weighing only 1600Kg in its basic configuration it is 400Kg lighter than the BROKK 180, which makes it perfect for running over suspended floors.

Design

Its footprint can be reduced to 780mm in width allowing access through standard doorways, corridors and into lifts. The Brokk 160 can also climb stairs Brokk 160 Power where you need it The Brokk 160 comes with a powerful 18.5KW motor and a three part hydraulic arm system that can reach 4.8metres high. Its powerful Concrete cruncher's can crunch concrete up to 420mm thick The BROKK 160 has a 360 degree turning circle

Machine Specification

Additional Information

Slewing Speed 10 sec/360°
Incline angle, max 30°
Transport Speed ,Max 2.1 km/h; 0.6 m/s; 1.3 mph
Hydraulic system capacity 80 l; 21.1 US gal
Pump type Variable load-sensing piston pump
System pressure 17.0 MPa; 2,466 psi
Pump flow max 50 Hz 100 l/min; 26.5 US gal/min 60 Hz 120 l/min; 31.7 US gal/min
output 18kW
Type ABB
current 38A
Starting device Soft start/Direct start
Transfer Cable/Radio
Signal code Digital
Control type Portable control box
Weight of base machine excl. attachment 1,600 kg; 3,527 lbs
Recommended max. attachment weight 270 kg; 595 lbs
Sound power level Lwa, measured according to directive 2000/14/EC 87 dB(A
Enquiry Form

Product enquiry form

Contact Information

  • Refresh

* Required Fields



3 Item(s)

3 Review(s)
30 November 2015
Job well done
I would like to take this oppurtunity to thank darren, david, martin for the works they did with the brokk 160 and the brokk 60 crunching slabs and beams. And utilisiing the smaller machine for the tight enclosed areas of the project were the bigger machine couldnt operate. First class service from start to finish. We will be using khd again on future projects thanks again.
20 September 2015
Excellent Machine
Used the machine to strip out with the grapple attachment, materials segregated and loaded into the dumper with no handling, Darren the operator was helpful and extremely skilled, will definitely be using KHD again
18 August 2015
Excellent Machine
We used a Brokk 160 from Kirkless Hall Demolition in a recent project breaking out 300mm of concrete flooring on a factory floor. We was amazed by the Power of the machine and how easily it broke through the reinforced concrete, The driver was very helpful and nothing was too much trouble for him. We will be using Brooks on all our future projects.